POSTS
Service discovering Docker cluster on Digital Ocean
Jeff Lindsay wrote about “Consul Service Discovery with Docker” and Automatic Docker Service Announcement with Registrator. Using Docker’s event stream is an elegant solution to finding out which containers are running on a particular host. Despite Jeff’s documentation and videos, I couldn’t get Consul to serve up the correct locations of my services.
Here is a description of what I did to get a service discovering cluster to run on Digital Ocean.
Goal
I want to have a highly available service running on my Docker cluster, discoverable by using some command line or code. One service should be able to find any number of other services and instances on any host in the system.
Overview of the solution
Each docker node has a Consul and a registrator container. They could also have some Nginx instances. The first node, here called docker1, can for example have one instance of HAProxy running, which will be the entrance to the Nginx cluster. For a production setup, you would typically set this up to not be a single point of failure.
Set up Digital Ocean
Log in to your Digital Ocean account and start three droplets. Name them docker1, docker2, and docker3. Use the smallest size. Put them in the same region, enable private networking and select the “Docker 1.3.0 on Ubuntu 14.04” application. Last, add your SSH key if you have one configured. None of the Nginx containers are accessible directly from the open internet, only the HAProxy and Consul containers are. Wait for the droplets to start and ssh in to each one.
The eth0 interface is public, eth1 is the private network. I’m using this private network for Consul’s internal communication.
Start Consul
I used progrium/consul to start Consul in a Docker container. The cmd:run command comes in handy.
First, execute the following command on each node to store the private IP in an environment variable:
PRIVATE_IP=$(ifconfig eth1 | awk -F ' *|:' '/inet addr/{print $4}')
Node 1
The first host has a slightly different startup incantation:
$(docker run --rm progrium/consul cmd:run $PRIVATE_IP -d -p 8080:8500)
Let’s break this apart. The cmd:run command outputs a docker run statement with all the ports linked correctly. This gets wrapped in a subshell. Next comes the IP address Consul should communicate over with other nodes. Last, I’m passing -d and -p 8080:8500 to the run command so the Consul container starts in daemon mode and exposes port 8080 on the host’s public IP.
Note the private IP for node 1, we’ll need this in the next step. Run ip addr show eth1 to show the IP.
Nodes 2 and 3
For the last two nodes we need the private IP address of node 1. On both nodes, run:
JOIN_IP=<private IP of docker1>
$(docker run --rm progrium/consul cmd:run $PRIVATE_IP::$JOIN_IP -d -p 8080:8500)
The two nodes will join the Consul cluster and all will be well.
Start registrator
When we start a Docker container with exposed ports, we want it to be registered with Consul automatically. For this, we have registrator.
docker run -v /var/run/docker.sock:/tmp/docker.sock -h $HOSTNAME -d --name registrator progrium/registrator consul://?????:8500
Wait… how can the registrator find the Consul container? We could link them using --link, we could find out and specify the Consul container’s internal IP address using docker inspect consul. Instead, we’re going to use another elegant solution that’s part of Jeff’s docker-consul image. When using the cmd:run command, port 53/udp (DNS) gets exposed on the docker engine IP, 172.17.42.1.
Consul functions as a DNS server so we can find out the location of Consul itself using DNS.
docker run -v /var/run/docker.sock:/tmp/docker.sock -h $HOSTNAME -d --name registrator --dns 172.17.42.1 progrium/registrator consul://consul.service.consul:8500
This works for any container that wants to discover services. Note that Jeff suggests using DNS exactly like this. Since it’s worded as a suggestion, I thought it would only be a convenience. Instead, this is one of the keys to make this setup work. Follow Jeff’s advice and set the DOCKER_OPTS env variable. For clarity’s sake, I will keep on adding --dns to the docker run commands, but it’s not necessary to do that if you set the environment variable correctly.
Conclusion
Start a bunch of Nginx servers, use docker run -dP nginx. Then, run a container that has dig installed, for example docker run --rm -ti --dns 172.17.42.1 remmelt/debian:sid-dig bash. Request the SRV records: dig nginx-80.service.consul SRV and look!
; <<>> DiG 9.9.5-4.2-Debian <<>> nginx-80.service.consul SRV
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 1638
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 3
;; QUESTION SECTION:
;nginx-80.service.consul. IN SRV
;; ANSWER SECTION:
nginx-80.service.consul. 0 IN SRV 1 1 49168 docker1.node.dc1.consul.
nginx-80.service.consul. 0 IN SRV 1 1 49166 docker1.node.dc1.consul.
nginx-80.service.consul. 0 IN SRV 1 1 49164 docker1.node.dc1.consul.
;; ADDITIONAL SECTION:
docker1.node.dc1.consul. 0 IN A 10.133.240.63
docker1.node.dc1.consul. 0 IN A 10.133.240.63
docker1.node.dc1.consul. 0 IN A 10.133.240.63
;; Query time: 13 msec
;; SERVER: 172.17.42.1#53(172.17.42.1)
;; WHEN: Fri Oct 17 22:38:35 UTC 2014
;; MSG SIZE rcvd: 356
Consul responds with a list of nodes running the requested service, including ports, in random order.
Automate this, for example using Confd or by requesting DNS SRV records in your application, and you have a service discovery!